Just a theory, but it may begin November 25th. The time to prepare is largely over; supplies are selling out. Guides will be updated when possible.

All supply lists

Water

Water source testing

  1. A home water test kit: 25 strips for nitrate, nitrite, copper, fluoride, pH and more, plus one lead and one bacteria test.

    Explanation
    • Use this on any well, spring or stream you plan to rely on, before you need it. Its strips check for problems that purification doesn't fix, so you can recheck a source over time.
    • Nitrate matters most: it comes from fertilizer, manure and septic systems, it's dangerous for babies (never mix formula with high-nitrate water), and filters and boiling don't remove it.
    • Test again after a flood, or if something changes upstream.
    • Save the bacteria test for checking treated water. It doesn't test for arsenic; use the arsenic kit for that.
    • Store it indoors, dry and sealed; the box says 59–77°F, so not a hot garage.
    • Home kits are a first check, so confirm any bad result with a lab. The box includes a kit for mailing a sample to a lab for a fee. If you know of a groundwater source nearby that you might use, send a sample now, while labs are still open.
    View on Amazon
    Tech specs
    Tests for14 parameters, including lead, bacteria, hardness, nitrates and pH (full list on the package back)
    Lab optionIncludes a sample kit for optional testing at the maker's EPA-certified lab
    Made inUSA

    Figures from the Amazon listing.

  2. A home test for arsenic in a well or spring (one test).

    Explanation
    • Test each well or spring you'd rely on for more than a few weeks.
    • Arsenic occurs naturally in rock and has no taste, smell or color. It's common in parts of New England, the Upper Midwest, the Southwest and the West, especially in deeper wells. It does its damage over years.
    • Camping filters like the Sawyer don't remove it, and boiling makes it worse by concentrating it; distillation or reverse osmosis will take it out.
    • The safe limit is 10 parts per billion.
    View on Amazon
    Tech specs
    Range0 to 500 ppb (the EPA limit is 10 ppb)
    Results30 minutes, no strips
    Tests1, plus a sample kit for optional testing at the maker's EPA-certified lab

    Figures from the Amazon listing.

Water purification

  1. Pre-measured chlorine tablets that make water safe to drink: one tablet treats 4 gallons in 30 minutes.

    Explanation
    • Aquatabs are the everyday choice: no mixing or measuring, and a box is easier and safer to store than a bag of pool shock.
    • Filter first if you can: a filter removes Cryptosporidium, which chlorine can't kill, and chlorine works best in clear water.
    • After 30 minutes, check with the Hach strips for free chlorine of 0.5 to 2.
    • Store them apart from pool shock and never mix the two; together they can catch fire.
    View on Amazon
    Tech specs
    Dose1 tablet per 4 gal; wait 30 minutes
    Pack100 tablets, enough for 400 gal
    Kills (maker's claim)99.9999% of bacteria, 99.99% of viruses, 99.9% of cysts (Giardia)
    ExpiresFebruary 2029 (the listing's date)

    Figures from the Amazon listing.

  2. Test strips that show whether treated water got enough chlorine, plus its pH, hardness and alkalinity.

    Explanation
    • Use this after treating water with Aquatabs or pool shock. Wait 30 minutes, then dip a strip.
    • Free chlorine is the reading that counts: 0.5 to 2 means the dose worked and the water stays protected in storage. At 0, add more and test again after another 30 minutes. Above 4 is more than drinking water should have, so let it stand uncovered and retest.
    • If total chlorine reads much higher than free, the water is dirty enough to be using up the chlorine. Filter it first or dose more.
    • Check the pH too: above 8, chlorine works much more slowly, so give it longer or dose more. Aim for 6.5 to 8.5; below 6.5, water can pull metals out of pipes and containers.
    • Alkalinity only shows how easily the pH shifts, and hardness is about taste, so neither affects safety.
    • A good reading means germs are handled, not chemicals like nitrate or arsenic, and not Cryptosporidium. That's what source testing and filtering are for.
    • Test your tap water now and write down its normal free and total chlorine, so you'll know if it changes after a power outage or a drop in water pressure.
    • Close the bottle tightly right away; humidity ruins the strips.
    View on Amazon
    Tech specs
    Free chlorine0 to 10 mg/L
    Total chlorine0 to 10 mg/L
    Total hardness0 to 425 mg/L (0 to 25 gpg)
    Total alkalinity0 to 240 mg/L
    pH6.2 to 8.4
    Pack50 strips

    Figures from the Amazon listing.

  3. Chlorine dioxide tablets that purify water and, unlike regular chlorine, kill Cryptosporidium. One tablet treats one liter.

    Explanation
    • For the go-bag, when you can't be sure you'll have a water filter.
    • Aquatabs and pool shock use regular chlorine, which can't kill Cryptosporidium, a parasite that causes severe diarrhea.
    • The catch is time: bacteria and viruses are dead in 15 minutes and Giardia in 30, but Cryptosporidium takes up to 4 hours.
    • At one liter per tablet, keep them for emergencies, not everyday water.
    View on Amazon
    Tech specs
    ChemicalChlorine dioxide, 4 ppm in use
    Dose1 tablet per liter; 15 minutes in clear water, up to 4 hours in cold or cloudy water
    Pack20 individually sealed tablets
    Shelf life5 years

    Figures from the Amazon listing.

  4. Concentrated chlorine (calcium hypochlorite) pool shock: a last-resort way to disinfect large amounts of water.

    Explanation
    • If you dip into the pool shock, something has gone horribly wrong.
    • You only need one bag. Singles can be found cheaper at pool stores, or share with friends.
    • If you buy a different brand, it must be calcium hypochlorite ("cal-hypo"), non-stabilized, without cyanuric acid, algaecide or clarifier.
    View on Amazon
    Tech specs
    Strength73% calcium hypochlorite
    Pack6 × 1 lb bags
    FormGranular, fast dissolving

    Figures from the Amazon listing.

  5. A home test for bacteria in water, to check that your filtering and treatment worked.

    Explanation

    It isn't for raw water: all raw water has bacteria. It's to make sure you turned raw water into pure water.

    View on Amazon
    Tech specs
    DetectsColiform (including E. coli) and non-coliform bacteria, down to 1 per mL
    ResultsIn 6 hours at high levels; 24 to 48 hours at low levels or in a cool room
    Pack4 tests
    ModelWS-831, made in the USA

    Figures from the Amazon listing.